How to maintain the fully automatic pipe cutting machine with full marks?
1. Keep the cutting head dust-free
Maintaining the cutting head is essential for achieving high-precision cutting quality. From entering the lens cavity, it is easy to be contaminated, which affects the cutting effect of the cutting head, and even the dust and dust of life. Therefore, to ensure that no dust enters the cutting head, after installation of the pipe bending machine, the cutting head can have a textured plastic seal.
2. Dimming correction
Check whether the light is emitted from the center of the nozzle before cutting every day, otherwise recalibration is necessary.
3. Inspection of protective lenses
Before cutting every day, check whether the protective lenses are clean. Otherwise, use isopropanol or analytical pure (alcohol purity above 99.5%) to clean the protective lenses. They are clean and tidy, without any signs of water accumulation
4. Nozzle inspection
Before each cutting, we need to check the roundness and cleanliness of the nozzle and cleaning nozzle. (Two types of nozzles: nozzles, used for traditional cutting components with sufficiently smooth spacing between tubes; beak nozzle spacing for cutting small parts, and grooves on convex hulls).
5. Ceramic ring inspection
Check the ceramic ring, shape memory alloy thread, shape memory alloy pin, and preamplifier for looseness or foreign objects, and tighten and clean them daily.
6. Foreign object inspection
Check the area around the chuck every day for iron filings, iron blocks, and other foreign objects. If found, clean it with an air gun and manually add oil. Add grease to the gear: 2 # molybdenum disulfide lithium grease Add N32 oil to the claw every two days
7. Clean the rack
Check the rack for foreign objects every day before work, and if any are found in a timely manner.
8. Regularly check the amount of lubricating oil used and replenish it in a timely manner.
This equipment is a dual lubricating oil system. If the automatic oil pump oil level is too low, the oil pump system will alarm, and it is necessary to use Great Wall heavy-duty vehicle gear lubricating oil 90GL-5 to inject oil in a timely manner and reset it The guide rail is lubricated with a manual oil gun. Align the machine's oil inlet every 15 days and apply oil 30 times each time. Please use 2 # molybdenum disulfide lithium grease.