Common problems with aluminum profile extrusion press machine plant line and causes of heating tube damage
The aluminum profile extrusion press machine plant line in the extrusion machine is one of the types of extrusion machines and also one of the products on the website. Therefore, it is imperative to have a better understanding and understanding of it. Moreover, for us, this can also benefit from understanding different types of extrusion machines. So next, it's best to continue on the basis of the previous work, so that the above objectives can also be achieved.
How to know the tonnage size of the aluminum extrusion machine?
If you want to know the tonnage size of the aluminum extrusion machine, you can refer to the markings on the extrusion beam of the extrusion machine or the initial interface of the operating platform, which will also be explained accordingly. However, we need to know that even with the same model of aluminum extrusion machine, it can still squeeze different specifications of cast rods, rather than just one type.
2. What common problems may occur during the use of aluminum extrusion machines? In addition, what is its main price related to?
The common problems encountered during the use of aluminum extrusion machines are sudden stoppages and mechanical or other malfunctions. Therefore, we should pay attention to these two aspects and not take them lightly. In addition, the price of this type of extruder is generally related to the manufacturer, specifications, models, and usage requirements, so it should be considered and there should be no omissions.
What are the reasons why heating pipes in aluminum extrusion machines are prone to damage?
If the heating tube in the aluminum extrusion machine is prone to damage, there are mainly the following specific reasons: firstly, the material selection of the heating tube is not appropriate, or the material quality is not qualified; Secondly, during the production process of the heating tube, there are issues with the production process or improper design, such as the tube wall being too thin; Thirdly, the gap between the heating tube and the mold is too large, which leads to its dry burning and damage.