What are the extrusion methods for aluminum profile extrusion machines and how to solve high oil pressure and temperature
There is an aluminum extruder in the extruder. As the name suggests, it is an extrusion machine used to produce aluminum profiles. Therefore, there will be this actual name. So, as mentioned at the beginning of the article, it is recommended to learn, master, and master the professional knowledge of this type of extrusion machine, so that it can be used correctly and reasonably, rather than wrongly applied.
What are the extrusion methods for aluminum extrusion machines and how to solve high oil pressure and temperature
1. Does the aluminum extrusion machine have any accessories? And what are the squeezing methods?
The aluminum profile extrusion machine mainly consists of an organic seat, a front pillar frame, a lifting column, an extrusion cylinder, and an electrical control system. Moreover, it comes with accessories such as mold bases, thimbles, scale plates, and sliding plates. Specifically, there are five extrusion methods: forward extrusion, reverse extrusion, side extrusion, hydrostatic extrusion, and continuous extrusion.
2. What is the forward extrusion method of aluminum extrusion machines?
From a professional perspective, the forward extrusion method of aluminum profile extrusion machines is forward thermal expansion extrusion. It obtains the required aluminum profiles from specific molds, such as flat molds, conical molds, and parting molds. Moreover, this is a common extrusion method for this extruder.
Do the molds used in the aluminum extrusion machine have different specifications and sizes? In addition, what is the standard temperature of its heating furnace?
The aluminum profile extrusion machine uses molds with different specifications and sizes, and the corresponding mold specifications and sizes vary depending on the tonnage of the extrusion machine. Therefore, everyone should treat it correctly and not make mistakes in their choices. And the standard temperature of the heating furnace is 400 to 480 degrees.
4. Does the aluminum extrusion machine have high oil pressure and temperature when squeezing thin materials? How to solve it?
Aluminum profile extrusion machine, when squeezing thin materials, has a large extrusion pressure, which will cause the oil pressure and temperature of the extrusion machine to be higher. However, it can have adverse effects on the extruder itself, and even affect the normal operation of the equipment. Therefore, it is necessary to control the oil temperature or cool the hydraulic pipeline to prevent difficulties from occurring.