How to understand the price and function of aluminum profile extruder
At present, it is known that the prices and types of aluminum profile extrusion machines are different, so there are many types of extrusion machines. Although the working points are different, their working points are the same. When the high pressure working fluid supplied by the aluminum profile extrusion machine has a surplus, the accumulator will store it. When the supply is insufficient, the accumulator will supplement the supply. However, because the working fluid pressure is constant, the power consumption is large, How to understand the structural advantages of the system?
How to understand the price and function of aluminum profile extruder
So far, the aluminum profile extrusion machine has been constantly updating its technology. It can be seen from the obvious improvement of its working mode that the advantages of the new product extrusion machine are simple and effective structure, quick and convenient clamping operation of aluminum profile, high clamping stability, and accurate extrusion molding. Therefore, the aluminum profile extrusion machine can greatly extend the distance between the thermal insulation base and the movable oil cylinder, So as to effectively prevent the heat in the heat insulation seat from being transferred to the oil cylinder, ensure the sealing performance of the seal in the moving oil cylinder, prevent the oil leakage of the moving oil cylinder, and make the profile easy to operate when it is squeezed.
The aluminum profile extrusion machine has a compact structure and is equipped with a spindle device. The inner cavity of the spindle is equipped with a mechanical lifting device, which can automatically and repeatedly lift and feed. It can be continuously formed, and the control speed is stable and automatically adjusted. It can reduce the shrinkage of the extruded aluminum profile and improve the surface quality of the extruded workpiece. The extrusion machine is simple in structure, convenient and practical, and easy to observe the inside of the extrusion cylinder and the extrusion die, thus improving the production quality.
Because the power system of the extruder is controlled by a relay or a transmission signal level meter, this part of the fault may not be provided on time. It may be because the system cannot operate normally when the transmission level meter signal is blocked. The electronic control unit can display the fault on the screen and be more direct. As long as it is not ruled out that it has restarted, this will cause the equipment to resume normal operation. This type of extruder is conducive to rapid extrusion and demoulding, And prolong the service life with high efficiency.