The application effect of the control system for the extrusion machine of copper and aluminum profiles
In recent years, the national aluminum processing industry has been rapidly promoted. Due to the many advantages of aluminum profiles, some copper-aluminum profile extruders have been promoted nationwide and are also producing different tonnage copper-aluminum profile extruders nationwide. Due to the very good production capacity, many copper-aluminum profile extruders are fully used and the production efficiency is low. At present, the importance of design theory is the key to extrusion profiles, All technical parameters have reached the expected target and have been reused.
The application effect of the control system for the extrusion machine of copper and aluminum profiles
Now, the achievements of the aluminum extrusion industry have been promoted, but the problems of insufficient development of industrial profiles have been claimed, and the opportunities for promoting and applying industrial profiles have been claimed to improve their own construction. They have changed the extensive promotion mode. In this case, some factories have seen the advantages of products. At present, the copper and aluminum profile extrusion machine is used to manufacture various types of materials. Due to the complexity of the overall dimensions of the copper and aluminum profile extrusion machine, The deformation of velocity and temperature origin in the same part is completely different, and the thermal effect of extrusion process is large in the microstructure of high temperature and low deformation.
At present, it can move laterally and support the copper and aluminum extrusion machine of rotary die, and can also be used according to the situation. It is used for heating and disinfection, cooling washer extrusion and disinfection together, air cooling or water or oil cooling can be used around the joint. In the actual use of corrosion plug, it can be used instead, and a certain number of joints can be processed and replaced to ensure sufficient cooling time. Generally, natural cooling in the air can meet the requirements, Therefore, the copper and aluminum profile extrusion machine can be completed with faster and faster speed and pressure, as well as the angle of the waste that can cause cracks on the surface and products, and the length of the ingot is in the reverse direction of extrusion, but the ingot is extruded upward, about twice the length, the extrusion temperature of copper and copper alloy is relatively low, and the temperature difference between the metal ingot and the extrusion tube is small, so that the corrosion stops and the device is used for cutting.