Beyond the principle of aluminum profile extrusion press machine plant line

The principle of the extruder must have been explained before, but let's repeat it today so that we can review the old and learn the new. Then, Xiaobian will introduce some other contents, so that you can know more about the extruder product, know more about its knowledge content, and increase your knowledge in this area.

What is the working principle of the extruder? In order to answer this question, Xiao Bian searched some information online to better answer. The working principle of the extruder is simply to use the "continuous press principle" to carry out the extrusion work.

1、 Precautions for 850 ton extruder

1. Scissors rise and fall

The die base must be at the extrusion or hole cleaning position, and its ingot hole must be at the opening limit position.

2. The manipulator rises

The main machine must be at the back limit position, and the ingot hole must be at the close limit position.

3. Main engine forward

The main engine moves forward rapidly until it enters the extrusion position, and the manipulator must descend and pass through the safe position, so that it can continue to move forward.

4. Die base forward and backward

The scissors must be in the upper limit position, the ingot container must be in the open limit position, and the main machine must be in the back limit position.

2、 Operating instructions for extruder

1. Select the appropriate aluminum rod according to the operation plan, and implement it according to the specified process temperature.

2. The appropriate mold shall be selected according to the operation plan to avoid problems.

3. When extruding, the pressing speed should be slow, not too fast. Moreover, the extrusion speed should be properly adjusted according to the situation.