Analysis of the annual output and technical parameters of the 630 ton aluminum profile extrusion press machine plant line

The daily output of the aluminum profile extrusion press machine plant line, the annual output value, the production efficiency, how the output is calculated, and the technical parameters of the 630-ton aluminum profile extrusion press machine plant line, we will help you answer them one by one in our article.

The annual output of aluminum extrusion press is based on:

1. The output of the aluminum profile extrusion press machine plant line is different depending on the use of the die.

2. The wall thickness of the raw aluminum profile also affects the output, and the thicker it is, the easier it is to discharge.

3. The material of the raw material of the aluminum profile, the bar of different materials, and the amount of output are also related to the output.

4. The use of 6063 bars is better for extrusion, and the output is also high.

Summary: So the output is related to the mold and raw materials. Generally, the aluminum profile extrusion press machine plant line equipment runs 24 hours a day, 5 tons for 630t, 6 to 7 tons for 800t, and 8 tons for 1000t.

630 tons of aluminum extrusion press technical parameters:

1. Working pressure of hydraulic system: 21Mpa, maximum extrusion force: P=630T

2. Rated power: 85KW

3. Specifications of aluminum rods: length less than or equal to 450mm, diameter less than or equal to 90mm

4. Total weight of 630T aluminum profile extrusion press machine plant line: about 25T

Our company reminds: "The specific aluminum profile extrusion press machine plant line knowledge still depends on the actual situation."