Many factors affecting the output and product quality of aluminum profile extrusion press machine plant line

1： The quality of aluminum bars directly affects the quality and output value of products

First of all, we all know that when using the aluminum profile extrusion press machine plant line to produce, the raw material for extrusion is aluminum rod. For some aluminum profiles with high quality requirements, the quality of aluminum rod will directly affect the quality and output value of the product. High quality aluminum rod can reduce the loss of the mold. High quality means alloying, refining, crystallizing and homogenizing, so as to maximize the extrusion speed.

2： aluminum profile extrusion press machine plant line configuration and operators affect product quality and output value

The aluminum profile extrusion press machine plant lines are all avantgarde prestressed frame aluminum profile extrusion press machine plant lines in the current market, and the output is significantly higher than that of the previous old aluminum profile extrusion press machine plant lines. Moreover, the operators of the aluminum profile extrusion press machine plant line should have a certain understanding of the aluminum profile extrusion press machine plant line itself and relevant technologies. In a word, to improve the output of extrusion products, avant-garde equipment, high-quality workers and modern scientific management play a vital role

effect.

3： Temperature affects product quality and output value

The accurate control of temperature is very important to improve the output. The temperatures here are respectively the temperature of the extrusion cylinder, the temperature of the extrusion pad, the mold temperature and the exit temperature of different aluminum alloy profiles. These temperatures have certain standards. Generally, the aluminum profile extrusion press machine plant line manufacturer will tell the aluminum profile manufacturer in the installation and commissioning stage, so there is no need to worry too much. As long as the operation is carried out according to the instructions of the technicians and the temperature is controlled, the product quality and output value can be improved.