Introduction to operation process of aluminum aluminum profile extrusion press machine plant line

1. The first is preparation

The operation of aluminum profile kneading machine shall be fully prepared before start-up. In addition to the stable equipment and preparation of materials to be kneaded, it is also necessary to check all systems in the equipment to ensure that no abnormal conditions exist.

2. The second is the operation of the equipment

When the kneading machine reaches the constant temperature, it can be started. In order to eliminate the difference between the bolt and the head thermal expansion in the equipment, the head and flange bolts should be tightened once. Pay attention when driving. Slowly rotate the screw speed adjustment knob, start the screw speed slowly, and then gradually accelerate to add a few materials together. In the kneading production process, we should regularly check various process parameters to ensure the quality of profile products.

3. Can close the equipment

If the operation is completed, the aluminum profile kneading machine can be prepared to be closed. However, only when the material in the kneading machine is extruded to expose the screw can the barrel and head power be closed and the heating be stopped. Then disassemble all parts of the equipment and clean them, and finally apply engine oil to avoid rusting.