How to solve the technical problems of the new aluminum profile extrusion press machine plant line

The new aluminum profile extrusion press machine plant line used now includes a base, an outer rod cavity and an inner rod cavity. The inner rod cavity is sleeved in the outer rod cavity, the outer rod cavity and one end of the inner rod, the rod cavity is fixedly connected to the base, the outer rod cavity and the end of the inner rod cavity are connected with a damping pad, the outside of the outer rod cavity is equipped with components, one side of the rod head is detachably connected to the fixed plate, and the damping spring is connected between the fixed plate and the pad. The current aluminum profile extrusion press machine plant line can be connected through the reinforcing plate, And the support rod increases the strength of the extrusion rod.

In addition, the extruder will not deform when using the extrusion rod, and the impact will produce spring and cushion, which can reduce the power generated by the impact and reduce the impact on the extrusion rod. The screw fixedly connected to one side of the component is removed from the fixed plate and the component is replaced, which reduces the cost of replacing the extrusion rod and ensures the impact of using the extrusion rod. The extruder now applied relates to the field of extrusion technology and solves the problem in the prior art, Technical problem that the center line of movable beam cannot be adjusted. Today's aluminum profile extrusion press machine plant line includes a rear beam, a moving beam and a front beam. Four tension columns are installed between the rear beam and the front beam. The moving beam is slidably installed on the four vertical columns. The rear beam is arranged on the moving beam on the vertical column. The moving beam is provided with four diagonally distributed mounting bosses. The mounting boss is provided with two adjusting mechanisms at the rear. The adjusting mechanism includes a sliding block, which is fixed and locked by a locking nut. One end of the adjusting screw, Rotatably engaged with the slider,

The current aluminum profile extrusion press machine plant line relates to the application structure of the extruder, including the barrel is provided with a feed inlet and an extrusion end, the screw is provided with a heating device, the pipeline is provided with a cooling device, the feed inlet is provided with a preheating pipe arranged around the feed inlet, the cooling pipe and the preheating pipe are connected to the heat recovery pipe, the circulating water tank is provided with a water inlet and a water outlet, the water inlet is connected with the preheating pipe, the water outlet is connected with the cooling pipe, and the water outlet is equipped with a water pump, This scheme can recover heat, save energy and improve work efficiency.