Must the aluminum profile extrusion press machine plant line be equipped with leakage protector?
With the rapid development and wide application of aluminum profile extrusion press machine plant line products, its attention has become higher and higher, especially the potential safety hazards in the operation process of aluminum profile extrusion press machine plant line. When the output power and extrusion capacity are continuously improved, the safe use of electricity is basically. As an efficient safety device, leakage protection
Does the protector have to be assembled in the aluminum profile aluminum profile extrusion press machine plant line?
I can tell you that the aluminum profile extrusion press machine plant line is not necessarily equipped with a leakage protector, because its motor has a small probability of power failure. At the same time, even if it has an excellent grounding device, it will not endanger life safety. Moreover, the heating wire of the heating part of the aluminum profile extrusion press machine plant line has already been equipped with leakage protector, so it can be used safely. Moreover, if the working voltage above 220V is really energized, the power supply will not be turned off until the leakage protector is brought into full play, which has long been unable to play a guarantee function for personal safety. Therefore, it is even more unnecessary to install leakage protector for the motor.
Pioneering design scheme of heating parts of aluminum profile aluminum profile extrusion press machine plant line
After more than ten years of development trend, aluminum extrusion has been very mature in China. Whether it is the commonly used aluminum profile aluminum profile extrusion press machine plant line or the matching extrusion process, it is very sound. Speaking of whether there are any areas to be improved, there are only the remaining energy-saving projects. At present, we have also obtained good test results in this aspect. In the early stage of the development of aluminum profile aluminum profile extrusion press machine plant line, the heating components equipped with its internal structure are used or foreign products, but because of the high price and long supply period, they can not be integrated into the necessity of extrusion manufacturing. In recent years, many manufacturers in China have developed, designed and manufactured heating components to replace various imported extrusion cylinders, but the product quality is uneven. You will not only endanger the production and manufacturing, but also lead to resource consumption.
It has been different since the straight rod heating pipe is owned. It can not only press the extrusion cylinder according to different models and sizes, but also has the advantages of symmetrical heating, faster temperature raising speed, convenient and fast installation and disassembly, reliable application, stable quality, super service life and short supply period; What's more valuable is that it doesn't need to shut down for refrigeration under the condition of replacement, which not only greatly improves the productivity of aluminum profile aluminum profile extrusion press machine plant line, but also has obvious effect of environmental protection and energy saving.