Analysis of the speed problem analysis of words for semi-automatic hydraulic pipe bending machine
Want long-term operation of the machine properly, we need to do routine maintenance methods and regulate the use of wide application of semi-automatic hydraulic pipe bending machine China is no exception, need to clear some attention problems and maintenance elbow speed.
During the operation of the semiautomatic tube bending machine, the bending machine components can be maintained in harsh environment conditions, inappropriate operation, and misoperation, and overload. The eluna mechanism is suitable for homework in an environment of ± 40 ° C and 0-95% humidity. The pipe bending machine is suitable for local use of altitude 0-3000m. Appropriate workplace should be selected before work. The place can only reach the accumulation of straight tubes and elbows, but also to ensure the pressure of the equipment can be accepted. Relting function, to check if the appearance of the anti-corrosion female tube has oil, pits, twists and turns, corrosion, anti-corrosion numbers and tube numbers are not clear or written, mechanical damage, etc., and do a good job record.
In addition, the main impact of the transition forming speed of semi-automatic hydraulic pipe bending machine on the formation quality is:
The speed is too fast, simply forms the flat, the roundness of the catheter is not required, forming the cracking of the catheter, discrirting; the speed is too slow, simply forming the wrinkles of the catheter and the pressing block slip, the tube diameter is easy Form a drop in the catheter. Confirm the twist speed of the catheter as 20% -40% of the machine's twist speed.