Matters needing attention in operation of single head hydraulic pipe bender
The operation of single hydraulic pipe bender must follow certain steps and methods. Do not move the button at will to avoid unnecessary load on the machine. How to operate is the right way?
Pay attention to the operation of hydraulic pipe bender.
1. The automatic pipe bender began to notice that the human body could not enter the scale swept by the rotating arm.
2. Automatic bending operation, all staff in the boom and pipe sweep space stop space!
Ya-n32 (signature No. 20) normal working oil is selected for the hydraulic system of automatic pipe bender and pipe bender, which is usually replaced once a year, and the oil filter should be cleaned together.
4. When adjusting the automatic pipe bender (die), the regulator must adjust the button by pressing the button. One person never adjusts to the automatic pipe bender, the other person operates in the control cabinet.
When adjusting the automatic pipe bender or emptying the car, it must be removed.
6. The pressure of hydraulic system should not exceed 14MPa. 7. When manually adjusting the speed of the side thrust cylinder, turn the arm to ≥ 900 for adjustment. Speed adjustment is synchronous linear speed bending arm elbow rotating arm. In the manual state, the pushing speed of thrust line is high, and the rotation of die is stopped. speed
8. Generally, after using the machine for a period of time, the chain fastening must be checked, and the upper and lower chains must be tightened.
9. The operator must ensure that the core is in the tube or the spindle does not interfere with the appearance when the bending arm returns before the bending arm returns to the torque in the active mode. Otherwise, the mandrel or core may be bent or cracked.